E3T-ST11, S3T-ST12

Mô tả

  1. Thông số
Shape Square type
Sensing method Through-beam type
Sensing distance 1 m
Standard sensing object Opaque, 2 mm dia. min.
Minimum sensing object 2 mm min. dia. (Opaque)
Directional angle Emitter: 2 to 20°
Receiver: 2 to 70°
Light source Red LED (650 nm)
Power supply voltage 12 to 24 VDC±10% ripple (p-p) 10% max.
Current consumption Emitter: 10 mA max.
Receiver: 20 mA max.
Control output NPN open collector
26.4 VDC max.
50 mA max.
Residual voltage: 1 V max. (Load current Less than 10 mA)
Residual voltage: 2 V max. (Load current 10 to 50 mA)
Operation mode Light-ON
Protective circuit Output short-cut protection, Output reverse polarity protection, Power supply reverse polarity protection
Response time Operate or reset: 1 ms max.
Ambient illuminance Incandescent lamp: 5,000 lx max.
Sunlight: 10,000 lx max.
Ambient temperature range (Operating) -25 to 55 ℃ (with no freezing or condensation)
Ambient temperature range (Storage) -40 to 70 ℃ (with no freezing or condensation)
Ambient humidity range (Operating) 35 to 85% (with no condensation)
Ambient humidity range (Strage) 35 to 95% (with no condensation)
Insulation resistance 20 MΩ min. (500 VDC megger)
Dielectric strength 1000 VAC 50/60 Hz 1 min
Vibration resistance Destruction: 10 to 2000 Hz, 1.5 mm or 300 m/s2 double amplitude for 0.5 hours each in X, Y, and Z directions
Shock resistance Destruction: 1000 m/s2 3 times each in X, Y and Z directions
Degree of protection IEC: IP67
Connection method Pre-wired models (Cable length 2 m)
Indicator Operation indicator (orange), Stability indicator (green)
Weight Package: Approx. 40 g
Accessories Instruction manual, Set screws for mounting (M2*14), Nuts
Material Case: Polybutylene terephthalate (PBT)
Lens: Denatured Polyarylate
Display: Denatured Polyarylate

Catalog

Danh mục/

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “E3T-ST11, S3T-ST12”

Email của bạn sẽ không được hiển thị công khai.

Contact Me on Zalo